WASTEWATER SYSTEMS
Chemical-Resistant Secondary Containment Coating Systems
Secondary containment areas must hold up to spills, UV, thermal cycling, and aggressive chemistries. We install reinforced epoxy and novolac systems engineered to your specific containment chemistry and regulatory spec.
Specs, build-up & where this system performs
Secondary containment areas must hold up to spills, UV, thermal cycling, and aggressive chemistries. We install reinforced epoxy and novolac systems engineered to your specific containment chemistry and regulatory spec.
- Novolac & vinyl ester chemistries
- Reinforced fabric / fiber options
- EPA / SPCC compliant
- Crack-bridging elastomeric topcoats
- Spill containment QC documentation
How we install your secondary containment coatings system
25 years of best practices, executed the same way on every project. No shortcuts on prep, no cure-time surprises.
1. Surface Prep
Diamond grind, shot blast, or abrasive blast to ICRI/SSPC profile. Crack repair, joint detail, and substrate moisture testing.
2. Primer & Build
Manufacturer-spec primer applied at recorded DFT, followed by build coats matched to your traffic, chemical, and thermal load.
3. Finish & Detail
Topcoat, broadcast aggregate, cove base, and transitions installed to spec — with documented mil thickness throughout.
4. QC & Closeout
Pull-off adhesion testing, photo documentation, manufacturer letters, and warranty paperwork delivered at completion.
Spec a secondary containment coatings system for your facility
Send us your floor plan or scope and we'll come back with a system recommendation and ballpark.
Real installs across the Western U.S.
Related services
Secondary Containment Coatings — Common Questions
Don't see your question listed below?
Every project starts with a plan.
We're always happy to answer any of your questions. Tell us about your facility, your timeline, and your spec.